pk10预测规律

Banner
Home > Industry Knowledge > Content
Comparison of computer cutting bed of major global brands
-2019-03-04-

Automatic computer cutting machine can be divided into laser cutting machine , water jet cutting machine , metal knife cutting machine and so on. Currently used in the sewing industry are mainly laser cutting machines and metal knife cutting machines. The following is a scientific introduction mainly on the automatic cutting machine with metal knife technology, which is intended to help relevant personnel of enterprises to learn from and refer to when purchasing automatic cutting equipment.


1. Middle and high-level automatic computer cutting machine

Mid-to-high-level full - automatic computer cutting machine is mainly targeted at large-scale sewing industry. Aviation accessories, furniture, car decoration, luggage handbags, yachts, tent umbrellas, industrial fiber prefabricated parts and other industries have been widely used.


In the actual production process, cutting graphics are made by computer CAD. After the graphics are arranged, they are input to the automatic cutting bed, and the fabric is cut by the automatic cutting bed. Because the bed surface of the cutting bed can be continuously rolled, continuous fabric cutting can be completed. In knitting fabrics, woven fabrics, composite fabrics, denim fabrics, coated fabrics, artificial leather fabrics and other industries that use more, you can choose middle and high-level automatic computer cutting bed.


In the selection of mid-to-high-level computer cutting beds, due to the high stacking height of the cut fabric, there will be errors in the cutting of the upper and lower films during the cutting of the computer cutting bed. Therefore, it is better to choose The computer cutting machine with intelligent knife compensation function can effectively reduce the error of the upper and lower cutting pieces, or control the error rate of the cutting pieces to a smaller range.


If cutting harder fabrics, such as denim fabrics, the selection of this type of cutting machine requires higher cutting heads, and the frequency of up and down vibration of the straight knife, that is, the rotation speed is above 5 000r / min. The quality cutting piece produces continuous impact to achieve the cutting effect. In addition, the design of the cutter head is also an important standard. During the high-speed reciprocation of the cutter, the cutter head will be impacted by various combined forces. The overly thin cutter head design will have a greater service life and cutting effect on the cutting head. Impact.


When cutting composite fabrics, chemical fiber fabrics, coated fabrics, and industrial fiber fabrics, each automatic cutting bed brand has its own different solution, and each has its own choices in terms of technology. For example, the special cooling method for cutting points adopted by the German Kuris automatic cutting machine in composite fabrics, chemical fiber fabrics, coated fabrics, etc., has good results. Not one by one here.


According to different industries, the demand for high-end automatic computer cutting machines will be different. For example, the women's underwear industry is more suitable for automatic cutting beds with a cutting height of 5-6cm, and the men's suit industry should not add equipment with a high cutting height.


The mid-to-high-level full - automatic computer cutting machines commonly used in the market are also very different in cutting speed, and the published data are often theoretical values of machinery. In actual production, the height of auxiliary materials, the characteristics of the fabric, the setting of the cutting route, and the complexity of the cutting graphics are all factors that affect the cutting speed. Therefore, the choice of cutting bed should be based on the actual situation. The following introduces several brands of high-end automatic cutting beds that are more recognized by users in the market for readers' reference.


Technical parameters of computer cutting machine:

(1) Large cutting height is 5cm.

(2) Large speed of 6 000r / min.

(3) Intelligent knife compensation technology.

(4) Vacuum frequency conversion technology.

(5) Cover the device with air leakage.

(6) Sharpen both sides of the grinding wheel at the same time.

(7) There are double cooling and special drilling holes for special fabrics.


1.1.2 TEXCUT 3070 / TEXCUT3080

Technical parameters of computer cutting machine:

(1) The large cutting heights are 7cm and 8cm, respectively.

(2) Large speed of 6 000r / min.

(3) Intelligent knife compensation technology.

(4) Vacuum frequency conversion technology.

(5) Cover the device with air leakage.

(6) Sharpen both sides of the grinding wheel at the same time.

(7) There are double cooling and special drilling holes for special fabrics.


1.2 American Gerber Company

1.2.1 GA5250

Technical parameters of computer cutting machine:

(1) The large cutting height is 5.2cm.

(2) High speed 5 800r / min.

(3) Intelligent knife compensation technology.

(4) Cover the device with air leakage.

(5) No vacuum frequency conversion technology.

(6) Grind the knives alternately on both sides of the grinding wheel.


1.2.2 GT7250

GT7250 High-level Cutting Machine

Technical parameters of computer cutting machine:

(1) The large cutting height is 7.2cm.

(2) High speed 5 800r / min.

(3) Intelligent knife compensation technology.

(4) Cover the device with air leakage.

(5) No vacuum frequency conversion technology.

(6) Grind the knives alternately on both sides of the grinding wheel.


1.3 MH8, M88 type automatic cutting bed of French Lectra company

Technical parameters of computer cutting machine:

(1) The large cutting height is 8cm.

(2) Large speed of 3 000r / min.

(3) Intelligent knife compensation technology.

(4) Vacuum frequency conversion technology.

(5) No re-covering device.


2.Low-level automatic cutting bed

The working principle of low-level automatic cutting bed is basically the same as that of middle-high-level automatic cutting bed. In terms of work effect, due to the relatively low number of layers of fabrics cut by the low-level automatic cutting machine, the low-level automatic cutting machine basically does not install a dynamic balancing device and a knife intelligent device after the crankshaft connecting rod device. They use the rigidity of the cutter itself to ensure the consistency of the upper and lower pieces, so they will not be described one by one here. Below, the author introduces the brands and models of low-level automatic cutting machines commonly used in the market for readers' reference.


Technical parameters of automatic cutting machine:

(1) The large cutting height is 2.5cm.

(2) No-knife intelligent compensation technology.

(3) No vacuum frequency conversion technology.

(4) Cover the device with air leakage.

(5) Grind the knives alternately on both sides of the grinding wheel.


2. 2 German company KURIS (TEXCUT3025) low-level automatic cutting machine

Technical parameters of automatic computer cutting machine:

(1) The large cutting height is 2.5cm.

(2) Large speed of 6 000r / min.

(3) No-knife intelligent compensation technology.

(4) Vacuum frequency conversion technology.

(5) Cover the device with air leakage.

(6) Sharpen both sides of the grinding wheel at the same time.


2. 3 MX type low-level automatic cutting machine from Lectra

Technical parameters of automatic computer cutting machine:

(1) The large cutting height is 2.5cm.

(2) High speed of 6 000r / min.

(3) No-knife intelligent compensation technology.

(4) Vacuum frequency conversion technology.

(5) Cover the device without leaking air.

(6) Grind the knives alternately on both sides of the belt.


3.Desktop single-layer automatic cutting bed

Fixed-table single-layer automatic cutting bed is mainly used in custom suits, small batch high-end fashion, small-scale handbag production, proofing, various dresses, airships, parachutes, sails, and industrial fiber prepreg materials. Generally less output, but the accuracy requirements are relatively high.


In the development of such automatic cutting machines, various technologies have appeared. In the early days, the technology was mainly based on the pneumatic round knife rigid breathable pad. However, due to the short use time of the ventilated pad, the air knife has a large damage to the bed surface and the frequency of bed surface replacement is high. Abandoned by users.


At this stage, the technology of fixed-table single-layer full-automatic cutting bed has gradually moved into two different directions. One type is represented by the mane brick straight knife technology, and the other is the electric round knife soft felt pad. In terms of ergonomics, economy, stability, etc., the characteristics and emphasis of these two types of fixed-table automatic cutting machines are also different, but in general, the two types of fixed-table single-layer automatic cutting machines have become this type. Product mainstream.


Most of the suppliers of fixed-table single-layer full-automatic cutting beds can produce different cutting lengths and cutting widths for users according to their needs. Below I introduce several types of fixed-table single-layer automatic cutting beds in the market.


3. 1 Pneumatic Round Knife Hard Breathable Cushion

(1) DCS1500 / DCS2500 single-layer full-automatic cutting table of Gerber Company.


3.2.1 Germany's Kuris (TEXCUT3010) straight knife single layer automatic cutting machine

Technical parameters of automatic cutting machine:

(1) Large cutting height is 1cm.

(2) Large cutting speed of 60m / min.

(3) Vacuum frequency conversion technology.

(4) Sharpen both sides of the grinding wheel at the same time.


3.2.2 Germany's Kuris (TEXCUT3001) round knife / straight knife single-layer automatic cutting machine from Germany

Technical parameters of automatic cutting machine:

(1) Single layer.

(2) The large cutting speed is 90m / min.

Airbus manufacturers such as Airbus are in production.

3 .3 Single-layer Automatic Cutting Machine

3.3.1 GT1000 Straight Knife Single-Layer Automatic Cutting Machine

It is an ideal choice for single or single batch cutting, especially suitable for the production of men's suits and women's custom clothing. It is also an ideal cutting equipment for cutting sheet materials such as carbon fiber, prepreg and glass fiber. The stable bristle cutting table makes it easy to cut single or multiple layers of material.


Technical parameters of automatic cutting machine:

(1) Large cutting height is 0.5cm.

(2) Large cutting speed of 45m / min.

(3) No vacuum frequency conversion technology.

(4) Grind the knives alternately on both sides of the grinding wheel.


4.Conclusion

By comparing the technical performance of the mainstream automatic cutting bed supply brands in the market, the majority of sewing product manufacturers can objectively have a deeper understanding of the different types of automatic cutting equipment to be purchased by the company before purchasing, and find out The cutting equipment that really meets your own production needs, welcome to consult our products of Pengwei Intelligent Technology Co., Ltd.